Super soft, snuggly, cosy are three easy words to choose when describing this jumper. With a wide roll neck perfect for keeping your neck warm and a soft fleecy inside, it's another jumper you will not want to take off.
With a love for leopard print it was only a matter of time before I came up with another design to put it on! And a Peace sign is just perfect for right now! What do you think?
Made with 85% organic ring-spun cotton and 15% recycled polyester with a gorgeous dropped shoulder and welt pockets at the front. This gorgeous jumper is your winter wardrobe essential.
Please note that I am a size 12 and I’m wearing a Small! These are gorgeously oversized!
Do not dry clean. HTV should never be dry cleaned. The harsh temperature and chemicals that are used during dry clean just do not mix well with HTV.
Wash and dry garments inside out. By turning the garment inside out, you’re giving the vinyl a layer of protection during the wash. While washing and drying clothes, they’re rubbing up against each other and that abrasion during washing can cause your vinyl to peel prematurely.
Choose cold or warm water temperature settings for the wash. When washing garments that have htv on them, you don’t want your water temperature to exceed 80 degrees. High temperatures can weaken the adhesive on the vinyl which can cause the vinyl to peel or crack.
Use mild detergent. And avoid Fabric Softner if possible as this weakens the adhesive. You should also avoid bleach and stain removers in order to make the vinyl last as long as possible.
Dry on a low/tumble setting or hang dry. Just like when washing, you won’t want to dry your htv garments on high heat. If you stick with tumble dry or low heat, you should be good to go. If possible, you can hang dry your htv garments for best results. Hang drying should minimise any wrinkles you see in htv after washing.
Do not iron directly on the design. High heat from an iron will melt the vinyl and or burn the adhesive. If your design has wrinkled slightly due to the garment shrinking, try ironing the design using a piece of baking paper and make sure to use a low heat without the steam function on.